Project · Oman · October 2026

Commissioning an electrochlorination plant

In October 2026 we worked on the commissioning of an electrochlorination plant at a site in Oman. The photos below are our own, taken during the work.

Stainless cabinet row with the doors open: pneumatic fittings, rectifier units and the control cabinet
The cabinet row of the plant with the doors open — fittings on the left, rectifier units in the middle, the control cabinet behind them

What this plant does

Electrochlorination produces the sodium hypochlorite used for disinfection from brine, by electrolysis. That way no finished chlorine chemical has to be stored or transported, because it is generated where it is used. The main units of the plant are the rectifiers, the electrolysis cells, the fittings on the fluid side, and the control and power distribution cabinets.

Photos from the site

What you can see
on the plant

Inside the control cabinet: PLC and I/O modules on the mounting plate, rectifier units below
Control cabinet — PLC and I/O modules on the mounting plate, rectifiers below them
Power distribution cabinet: busbars, miniature circuit breakers and terminal blocks
Power distribution — busbars, circuit breakers and terminal blocks on the supply side
Inside the fittings cabinet: filters, valves and pneumatic connections
Fittings assembly — filters, valves and pneumatic connections inside the cabinet
The plant in the hall with the cabinet doors open, during commissioning
The plant during commissioning — doors open, wiring under check

A similar job?

If a plant is missing its control system, its operator interface or its commissioning, write us a short description. We reply within one working day.

Get a quote